5.11 Tactical Work Shirts*Men’s PDU Long Sleeve Twill Class B Shirt

Fabric Type:

65% polyester 35% cotton Twill with Teflon

Features & Benefits:

This shirt is made with a polyester cotton blend for a professional appearance and comfort that incorporates Teflon for stain resistance. The body features sewn-in military creases on the front and back. The long sleeve shirt incorporates collar stays along the front edge of collar and a Taffeta lined collar.

Design:

There are functional epaulets on each shoulder with reinforced box stitching at end and a button and button hole near the neck end. Bi-swing shoulder design allows for extra movement through the back shoulder and stitched eyelets on the underarm for ventilation. Two welt openings along side seam for microphone cord access. The sleeves have 1 button, adjustable cuffs. The hem is a Fish Tail design. The pocket design has two chest pockets with stitched pleats and pencil pockets on each flap. The pocket has hook and loop flaps with a button applied for appearance only.

Stitching & Finishing:

• Stitches per inch are 10 – 12 on all operations
• Triple needle stitching on the patented document pockets, chest pockets, armholes, back yoke, and bi swing gusset.
• Center front placket is 1 1/2″ wide with double needle stitching on both side.
• Pocket flaps, collar edge have 1/4″ double needle topstitch
• Hem is clean finished with a double roll turn back edge and 1/4″ single needle stitching.
• 2 Vertical bar tacks on each of the pocket flaps spaced 1 1/2″ apart for the Pen opening
• Single needle edgestitch on front yoke, side welt openings, badge tab, and epaulets
• Stitched eyelets in the front and back of the bottom of each sleeve for ventilation.
• Individually packaged in a poly bag like a dress shirt with plastic clips, cardboard collar band, and a molded plastic butterfly at center front.

Bartack & Reinforcement:

• Top and bottoms opening of Document pocket
• Bottom miter corners of the Document pocket
• Top corners of pocket flaps
• Top corners of chest pocket
• Top and bottoms opening of side welt openings
• 3/4″ up from side seam on the Bi-swing gusset
• 1 1/2″ long pen guide on each pocket hidden under the flap
• Top of sleeve plackets

Accouterments:

This shirt has a grommeted badge holder, working epaulets

Labels:

5.11 Main Label stitched along 4 sides inside the back yoke. Woven content/country of origin label, and the size label are sewn along the bottom edge of the main label. Care instruction label is permanently attached on left side seam below the waist.

Closures:

• Buttons ½ 4 hole Melamine buttons that won’t melt, burn, or crack.
• 20 Ligne Buttons:
• 1 at center front neck band
• 6 buttons appear on front placket: 3 fully function through button holes, the other 3 are applied directly to the top placket on top of the button holes, underneath is a zipper closure system that eliminates gaping between the buttons.
• Zipper ½separating YKK zipper that features and auto locking slider at CF
• 1 functional button for each epaulet
• 3 buttons on each cuff
• 1 Spare